8 Best Kayak Phone Mounts (November 2026)

Your phone does a lot of work on a fishing kayak. It is your map, your camera, your weather radar, and for many anglers the screen that runs a fishing app or a tide chart. The trouble is that a phone is also expensive, slippery and not waterproof by default, and a wrong mount lets it vibrate loose, glare in the sun, or drop into the water at the exact moment a fish bites. A good kayak phone mount holds the device firmly, puts it where you can read it, and gets out of the way when you need to paddle.

This guide is for paddlers who want a phone within view without giving up deck space, and who need to decide between a track ball, a screw base, a short arm and a long telescoping one. We compared eight mounts by attachment style, arm length and the phone widths listed in the titles. Details such as thread size or arm material are often cut off, so confirm them on the page before you buy for the 2026 season.

Quick Picks

Our top picks

Top pickxik Kayak Phone Holder Mount with T-Bolt

Check price on Amazon

Also greatYakAttack RotoGrip Phone Holder with 1" Screwball

Check price on Amazon

Also greatYakAttack RotoGrip Phone Holder Pro with LockNLoad

Check price on Amazon

Also greatHikeen Kayak Phone Holder

Check price on Amazon

Also greatFPN Kayak Phone Holder with Vibration Dampener

Check price on Amazon

Also greatFPN Kayak Phone Holder with Vibration Dampener

Check price on Amazon

Also greatxik Kayak Phone Holder Mount with T-Bolt

Check price on Amazon

Also greatQualyQualy Kayak Phone Holder Mount with Shade

Check price on Amazon

As an Amazon Associate we earn from qualifying purchases at no extra cost to you.

How to Choose

Check Your Phone Width and Case

Phone width matters more than screen diagonal. A holder rated for 4.7 to 7.2 inches covers most modern phones, but a thick case can push you past a narrow clamp. The YakAttack listings give a width range of 2.75 to 3.625 inches, which is a physical dimension you can measure with a ruler. Measure your phone in its case, and leave a bit of margin so the clamp can close without strain.

Attachment Style

Most kayak phone mounts use a ball on a base. A T-bolt track ball slides into a gear track, a screwball fits a 1 inch track accessory, and a LockNLoad base clicks into a compatible system. A screw-mounted round base needs drilling and is permanent. Pick the one your boat already supports. If you have no track, look at screw-mounted or rail-clamp alternatives, and plan the location before you drill.

Arm Length and Adjustability

Short arms hold the phone close and stable, while long ones place it where your eyes sit comfortably. Telescopic arms listed at 8.6 to 11.3 inches or 11.5 to 17 inches give a lot of reach, but longer arms also amplify vibration. Dual-adjustable arms let you tilt and rotate separately, which helps cut glare. A vibration dampener, mentioned in several titles, protects the camera module, especially for phones with optical stabilization.

Where Budget Mounts Cut Corners

Plastic ball joints that loosen over time and springs that lose tension are the common issues. Look for a locking collar, a quick-release clamp and an aluminum arm. A tether or harness, included in the YakAttack listings, is not a luxury: it is what keeps the phone from sinking if the grip slips. Add a waterproof case or pouch to protect the device from spray, since none of the titles mention waterproofing.

Sun and glare are a real factor. A mount that puts the screen at a slight angle away from reflected light can save you from squinting, and a small shade helps even more. Think about where your head is when you cast, and position the phone just off that line of sight so it is visible but not in the way of the rod swing.

If you plan to use the phone as a navigation aid, remember that screens drain batteries quickly in bright light and cold air. Keep a small power bank in a dry pocket, run a short charging cable along the deck, and secure it so it does not tangle with your feet. A cable that dangles loose is one of the easiest ways to yank a phone free of its clamp.

The 8 Best Options

xik Kayak Phone Mount With T-Bolt Track Ball

The xik uses a T-bolt track ball with 720 degree dual-adjustable arms and a one-second lock and release, fitting phones from 4.7 to 7.2 inches. The arm flexibility lets you tilt the phone toward you and rotate it for filming. It suits anglers with large modern phones and a gear track.

• Dual-adjustable arms for flexible positioning
• Wide phone range up to 7.2 inches
• Trade-off: more joints mean more points that can loosen

Skip it if your kayak lacks a gear track or you want a simple, rigid arm. Each pivot should be snugged down fully before launch, and a drop of threadlocker on the bolt is cheap insurance against vibration.

YakAttack RotoGrip Phone Holder

YakAttack lists a RotoGrip holder with a 1 inch screwball for track mounting, a harness and tether, and a fit for phones 2.75 to 3.625 inches wide. It is built around a track system and includes the tether in the title, which is a safety plus. The width range is narrow, so check your phone first.

• Harness and tether included
• Track mounted with a 1 inch screwball
• Trade-off: the width range excludes some large cased phones

Skip it if you use a phone with a thick case or a plus size screen. Because the clamp range is narrow, a quick measurement with a ruler at home saves a return later.

YakAttack RotoGrip Phone Holder Pro

The Pro version pairs the same width range with a LockNLoad mount, a steel tether and a 5 inch extension, and the title promises one-hand access. That combination suits paddlers who want to grab the phone quickly to take a photo of a catch, then put it back.

• LockNLoad base for quick removal
• Steel tether and 5 inch extension
• Trade-off: it only suits boats that accept the LockNLoad system

Skip it if your kayak uses another track style and you do not want an adapter. The one-hand access is most useful when you fish alone and cannot spare a second hand to wrestle the phone from a tight clamp.

Hikeen Kayak Phone Holder

Hikeen offers a 360 degree adjustable holder with a long arm, intended for kayak fishing and compatible with smartphones from roughly 4 inches up, though the title is cut off. The long arm helps place the phone at eye level. It is a no-nonsense pick for general use.

• Long arm for reach
• 360 degree adjustment
• Trade-off: truncated specs mean you must check phone size limits on the listing

Skip it if you want documented vibration control or a named track fit. Read the product page for the base type, since the cut-off title does not say which track or rail it attaches to.

FPN Kayak Phone Holder With Medium Arm

FPN lists a camera-friendly holder with a vibration dampener, a one-second lock and release, a 1 inch track ball base and an aluminum medium arm, with 360 degree adjustment. The dampener matters for people who film or use their camera on the water.

• Vibration dampener for camera protection
• Aluminum arm and 1 inch track ball base
• Trade-off: a medium arm may not reach as far as a telescopic one

Skip it if you need maximum reach or a very long arm. For most solo anglers, though, a medium arm keeps the phone close and steady, which is the more practical goal.

FPN Kayak Phone Holder With Telescopic Arm

This FPN model has an aluminum telescopic arm that extends from 11.5 to 17 inches, along with the vibration dampener and quick lock. The extension lets you place the phone beside the boat or at the bow for filming, which helps content creators. Longer arms also vibrate more, so tighten every joint.

• 11.5 to 17 inch telescopic range
• Camera-friendly dampener
• Trade-off: a long arm can wobble in chop

Skip it if you prefer a short, rigid mount near the seat. Folding the arm down when you paddle keeps it from catching the line or the paddle shaft.

QualyQualy Kayak Phone Holder With Shade

QualyQualy adds a shade to a T-bolt track ball mount with a dual-adjustable arm, fitting phones from 4.7 to 7 inches. The shade reduces glare on bright days, a feature few mounts include. It is a good match for sunny lakes.

• Built-in shade for screen visibility
• Dual-adjustable arm and T-bolt base
• Trade-off: the shade adds bulk and can catch the wind

Skip it if you use a polarizing screen protector that already handles glare.

Heavy-Duty Phone Mount With Vibration Dampener

This one is an aluminum screw-mounted round base holder for boat, kayak and truck, described as camera friendly with quick lock and release. The brand is not in the title, and the base is bolted rather than slid onto a track. It is the permanent option.

• Screw-mounted aluminum round base
• Multi-vehicle use
• Trade-off: it requires drilling, so placement mistakes are costly

Skip it if you want a tool-free or movable mount. Dry-fit the base and hold the phone in position while seated before marking any holes, so you know the sight line works.

Which One Fits Your Situation

You Have a Big Phone in a Thick Case

The xik or QualyQualy mounts list capacity up to 7 inches, giving you more room than the YakAttack width range.

You Film Your Catches

Take the FPN telescopic model, which lists a vibration dampener and a long extension for framing shots.

You Fear Losing the Phone

The YakAttack RotoGrip Pro includes a steel tether and one-hand access.

You Fish in Bright Sun

The QualyQualy with a shade is the sensible answer to glare.

Common Mistakes

• Buying without measuring the phone and case width.
• Skipping a tether, then watching the phone sink after a loose grip.
• Choosing a very long arm that wobbles in chop.
• Mounting where the rod swing or paddle hits the screen.
• Assuming the holder protects against water; add a waterproof pouch.

Related guides

• Shimano Stradic Fl Vs Daiwa Bg Spinning Reel
• Polarized Sunglasses For Kayak Fishing
• Battery Chargers For Marine Batteries

Frequently Asked Questions

Do these mounts work on any kayak?

Track and screwball mounts need a compatible gear track. Screw-mounted bases work anywhere, but require drilling.

Is a vibration dampener necessary?

It helps protect the camera module of newer phones from constant shaking. If you do not use the camera on the water, it is less important.

How do I keep the phone from falling in?

Use a tether or lanyard rated for the weight of the phone, and clip it to the boat, not to the mount.

Can I use a phone mount in the rain?

Yes, with a waterproof case or pouch. The mount itself does not provide any protection from water.